. .
  1. 08-12-2023 #1
    Smokie555's Avatar
    Lives in Belfast, United Kingdom.
    Smokie555
    Last Activity: 17-01-2025 Has been a member for 8-9 years. Has a total post count of 27. Received thanks 1 times, giving thanks to others 16 times.
    Hi, has anyone any experience with this spindle motor pulley on my Bridgeport Interact 1 series 2. I am changing the motor but wanted to reuse the pulley. I can get a 3 leg puller onto it but even with heat and a ton of force it only moved 1/8 of an inch and is now locked solid. It has two grub screws on the top (pic) which I have unscrews but wondered are you supposed to remove this type with an hydraulic feed contected to these two grub screw holes?
    Any help appreciated.
    Click image for larger version.  Name: 1.jpg  Views: 585  Size: 159.8 KB  ID: 32049
    Click image for larger version.  Name: 2.jpg  Views: 599  Size: 203.9 KB  ID: 32050
    Last edited by Smokie555; 08-12-2023 at 05:09 PM.
    Reply With Quote Reply With Quote
  2. 08-12-2023 #2
    m_c's Avatar
    Lives in East Lothian, United Kingdom.
    m_c
    Last Activity: 20 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 2,971. Received thanks 369 times, giving thanks to others 9 times.
    Are 100% sure there are no grubscrews on the side?
    And if there is, that they've not been doubled up?
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
    Reply With Quote Reply With Quote

  3. The Following User Says Thank You to m_c For This Useful Post:

  4. 08-12-2023 #3
    Smokie555's Avatar
    Lives in Belfast, United Kingdom.
    Smokie555
    Last Activity: 17-01-2025 Has been a member for 8-9 years. Has a total post count of 27. Received thanks 1 times, giving thanks to others 16 times.
    I'll check if they are doubled up in the morning m_c, I wonder what the grub screws are there for? Def none on the side.Click image for larger version.  Name: fgdre.jpg  Views: 587  Size: 201.2 KB  ID: 32051
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Chinese 300W DC spindle - is the spindle shaft grounded?
    By HankMcSpank in forum Spindles & Drive Motors
    Replies: 44
    Last Post: 26-11-2016, 07:25 PM
  2. misaligned keyway - stepper shaft vs pulley
    By dsc in forum Stepper & Servo Motors
    Replies: 9
    Last Post: 25-02-2014, 03:25 PM
  3. pulley fit on motor shaft - force it on?
    By dsc in forum Belt Drive, Pulleys & Timing
    Replies: 2
    Last Post: 09-08-2013, 06:11 AM
  4. 16 tooth pulley HTD5 15mm on a 14mm shaft
    By dsc in forum Belt Drive, Pulleys & Timing
    Replies: 6
    Last Post: 07-06-2013, 11:51 AM
  5. Stepper shaft size and pulley bore size problem
    By psiron in forum Linear & Rotary Motion
    Replies: 13
    Last Post: 15-06-2010, 04:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules