Quote Originally Posted by JohnHaine View Post
https://www.amazon.co.uk/Breakout-Co...s%2C152&sr=8-5

I recently replaced the BoB on my lathe with one of these driven by a uc100. Works fine.
Apologies for thread hijack, but perhaps John, or anyone using this ubiquitous board, can clear up a confusion with pins on the above board which I am in the process of installing.
If you look at the pictures of this board you will see that on the back of the board P14 is shown right in the corner and P2 is shown two in from that.
If you look at the instructions photo it shows P2 right in the corner and P14 two in.
Which is correct?