Thread: DC Power Supply
-
25-06-2024 #1
Trying to get a 5 axis machine running, just realised I can power the DC drives with a DC power source. Need between 90 and 150V and around 12A per axis (x 3) but will be OK with 1/3rd just for testing.
Would anyone have one for sale or one I can rent / borrow to test with please? I'm Oxfordshire based.
Thanks
-
I think you could do this with a 110v yellow industrial PSU
Then make a cable to a box to convert it to DC
Bridge rectifier + Capacitors
You will need to research what size capacitors and appropriate rectifier for the power input
My Torloidial PSU build produced ~80v AC after you ran it through rectifier it dropped to 70v DC and capacitors smooth out the rectifier
So I can't see why it wouldn't workhttp://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm
If you didn't buy it from China the company you bought it from did ;)
-
08-07-2024 #3
Thanks. I did the same later. One drive just spins and I Can control, the other trips the supply, no idea why but works on AC. I've given up on the system and started to retrofit.
BTW, you still owe me an explanation on why you didnt come down on the weekend I had pencilled in to help you.
-
14-07-2024 #4
Full wave rectification of 110Vac will tend to result in ~140Vdc, possibly even higher if (like me) you actually have a 250Vac supply. For my servo drives, I dismantled the secondary winding and removed enough turns to lower the output voltage when rectified to something like 130Vdc. If you do any fast deceleration, you may see an overvoltage trip if you are running close to the overvoltage threshold in the servo drives.
If you fancy removing secondary turns, there are versions of the site transformers that come in steel housings, rather than moulded yellow fibreglass with black potting inside. They are much simpler to dismantle and modify.
-
14-07-2024 #5
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Which power supply to use
By Palletlad in forum General ElectronicsReplies: 20Last Post: 13-04-2018, 05:34 PM -
Power Supply
By Ricky Burton in forum Milling Machines, Builds & ConversionsReplies: 4Last Post: 25-03-2018, 10:38 PM -
FOR SALE: power supply
By Web Goblin in forum Items For SaleReplies: 0Last Post: 14-09-2014, 03:19 PM -
Minimal-cost Power Supply Strategy - Repurpose Laptop Power Supplies
By LoveLearn in forum General ElectronicsReplies: 0Last Post: 25-01-2012, 09:29 PM -
FOR SALE: 50V 20A Power supply
By Jimmybristol in forum Items For SaleReplies: 8Last Post: 30-05-2011, 11:01 PM
Bookmarks