Hi all.

Selling up, it isn't for me. My Denford micromill has serial port lead, keyboard, monitor, mouse, hard drive and a serial port card. ER16 collets and a few carbides. Hard drive has Mach 3 installed.
Long story short (long versions are on this forum) Bought working machine with mach 3, machined some bits, hard drive died, got another PC, reinstalled mach 3 (from Newfangled Solutions), got part way through setting parameters, Motherboard died. Completely lost interest. This is over the course of several years, such is my enthusiasm.

Also comes with an orange bucket filled with ali offcuts. Leads coming through in to cabinet (pictured), are for a 4th Axis (never used)

£550, take it away.

Click image for larger version. 

Name:	20240601_134903.jpg 
Views:	77 
Size:	132.9 KB 
ID:	32362

Click image for larger version. 

Name:	20240601_134859.jpg 
Views:	71 
Size:	201.2 KB 
ID:	32363

Click image for larger version. 

Name:	20240601_134912.jpg 
Views:	91 
Size:	108.4 KB 
ID:	32364

Click image for larger version. 

Name:	20240601_134923.jpg 
Views:	81 
Size:	200.1 KB 
ID:	32365

Click image for larger version. 

Name:	20240601_134933.jpg 
Views:	84 
Size:	127.9 KB 
ID:	32366

Click image for larger version. 

Name:	20240601_134912.jpg 
Views:	91 
Size:	108.4 KB 
ID:	32364

Click image for larger version. 

Name:	20240715_144153.jpg 
Views:	68 
Size:	141.1 KB 
ID:	32367

Click image for larger version. 

Name:	20240715_211115.jpg 
Views:	78 
Size:	194.4 KB 
ID:	32368

Click image for larger version. 

Name:	20240601_134912.jpg 
Views:	91 
Size:	108.4 KB 
ID:	32364

Collection from Havant, near Portsmouth.

Thanks for looking