. .
  1. #1
    I want to run a 4010 and a 6010

    Can I just use a DB9 switch to connect them both up and switch between them? I know I have to make my own cables already on it.

    I have Toolpath now, I bought it and 1 USB ordered but 850 with Vat is not funny

    Especially as Toolpath seems terrible but as long as it works with Fusion 360 and Vcarve it doesn't matter

    Toolpath can control multiple machines

    It never came with dnc.exe just a 9 meg download

    Just worried hot swapping might damage the USB or AXYZ controller

    But saving 545+vat would be nice

    I only need to connect the machine to upload code right? Then I can disconnect it and connect to the other machine and repeat
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)

  2. #2
    There is no need for DNC if your controller works.It is only really justified if the controller is in poor order or if the file you are trying to run is enormous and would exceed the storage capacity of the controller.You use Toolpath to transmit the file and it might get interesting linking one computer to two machines.

  3. #3
    Quote Originally Posted by routerdriver View Post
    There is no need for DNC if your controller works.It is only really justified if the controller is in poor order or if the file you are trying to run is enormous and would exceed the storage capacity of the controller.You use Toolpath to transmit the file and it might get interesting linking one computer to two machines.
    Toolpath can do it according to AXYZ

    I asked them, I did not ask them about using a switch lol as they want to sell the USB device so will say no even if it works

    It's setup to run up to 8 machines he thought

    But they don't know shit at AXYZ honestly

    I have a noise one side, I think the belt tensioning spring on the Y on 1 side


    AXYZ were no help lol except to tell me not carriages and not motor

    But I noticed the spring is stretched the side making noise

    So replace spring and take from there

    It doesn't make the noise when homing

    Only when using the MPG which moves quicker
    http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm

    If you didn't buy it from China the company you bought it from did ;)

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

Similar Threads

  1. AXYZ new software ??
    By cncbeginner in forum AXYZ Routers
    Replies: 15
    Last Post: 2 Weeks Ago, 07:28 PM
  2. Axyz millennium
    By petesos in forum Machine Discussion
    Replies: 67
    Last Post: 03-08-2024, 03:45 PM
  3. In Need of AXYZ DNC exe pls
    By Arpad in forum Machine Control Software
    Replies: 1
    Last Post: 27-11-2023, 05:14 AM
  4. AXYZ 3000 Router - AXYZ-USB-1A - Drivers
    By soap47 in forum AXYZ Routers
    Replies: 12
    Last Post: 12-01-2023, 12:38 PM
  5. AXYZ Pacer 900
    By burnooot in forum AXYZ Routers
    Replies: 1
    Last Post: 27-03-2017, 08:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •