Hi guys clearing out the garage abit and decided to sell some bits n bobs i wont be using.

All the parts you see have only been used for testing and not actually used properly on a machine, so bearings have 0 wear and the rails are straight as a die.

There are

8 x SMA25 Bearings from Zapp
12 x SK25 Supports from Zapp
4 x 1829mm x 25mm ground and hardened rail
2 x 1415mm x 25mm ground and hardened rail

This little lot cost me over £450 new

The Rail can be cut down easily with a grinder/chop saw

open to offers