Hi Routerdriver
Thank you for the reply bud, Typically my jobs are about 300mm x 400mmx40mm all pretty much small stuff.
I create a model in either Vcarve pro or Aspire even the odd Cut 3d job . When i pass it to the machine in ANC mode and the job size is any bigger than 300x400 it comes back NOT ENOUGH MEMORY .
I have a metre work bed and am looking to do a massive wall piece for my living room using the tiled mode in aspire so it would be handy to utilise the whole bed.

When i load the axyz software it does come up with either use ANC or DNC but i pretty much always use ANC mode is DNC mode much different or can do more , i will do some research

Before i load any work onto the machine i always need to erase the memory.

Pete