Yes, that is right. The machine was working. I was looking for the right setting to put back into the VFD. I did find some, which are below. But the controller does not seem to turn the spindle on. I am NOT sure if these are the right settings for it. That is why I was hoping someone would have them. The manual is a bit confusing to me as I am new to the CNC and VFD world.

00.21=1
01.00=400
01.01=400
02.16=2
02.17=34
03.11=101.0
05.01=8.00
05.02=2.20
05.04=2
05.03=23999
06.06=4
06.08=5.0
07.01=40
07.02=2.0
07.03=2.0
07.04=5.00