Wiring ATC with UC300eth 5LPT and UCBB

[Phil Mayor]

i don't know if any of you could help me, I've got the Relay, working with my test Macro, it turns on and off 5 times with 5 second delay in between, the Relay lights up and I can see the LED on the UCBB light up also, but the Solenoid just sits there, I have air going to it through a regulator and when I use the Solenoid manual button it works fine, it just doesn't seem to work automatically with the UCBB/Macro....?

I've tried different wiring methods, but at the moment I've got the Positive Solenoid wire to the NO of the Relay and the Negative Solenoid wire to the COM of the Relay, then from the Coil - of the Relay I have the wire going to the UCBB Port1, Pin 1....