DIY spindle stall monitor

[EddyCurrent]

These inverter parameters look interesting;
PD118, PD119, PD120, PD121, PD122, PD123, PD124, PD125

[routercnc]

These inverter parameters look interesting;
PD118, PD119, PD120, PD121, PD122, PD123, PD124, PD125

Reading them now. Looks interesting! Worth experimenting with to see if it really can detect a stall through current monitoring and then trip the onboard relay (although I think that is omitted on my model, although I might be mixing it up with the inverter inspection I did for the drill press project)
External current monitoring did not seem to show much but maybe internally it is reading a different part of the circuit.

Might turn out to be the biggest waste of time project (except for the fun and learning)