. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 05-10-2025 #1
    Muzzer's Avatar
    Lives in Lytham St. Annes, United Kingdom.
    Muzzer
    Last Activity: 3 Hours Ago Has been a member for 8-9 years. Has a total post count of 474. Received thanks 76 times, giving thanks to others 24 times.
    Yes, those are the sort of features that get missed off some of the clone VFDs. You can get a fully featured 2.2kW Yaskawa GA500 with in-built EMC filtering and a plethora of features such as spindle at speed for a little over £200, which would have saved a lot of messing about, albeit without the challenge and fulfilment of developing something like this yourself.
    Reply With Quote Reply With Quote
  2. 16-11-2025 #2
    routercnc's Avatar
    Lives in West Midlands, United Kingdom.
    routercnc
    Last Activity: 3 Hours Ago Has a total post count of 1,769. Received thanks 424 times, giving thanks to others 78 times. Referred 3 members to the community.
    More development, more testing . . .

    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4
    Reply With Quote Reply With Quote
  3. 06-12-2025 #3
    routercnc's Avatar
    Lives in West Midlands, United Kingdom.
    routercnc
    Last Activity: 3 Hours Ago Has a total post count of 1,769. Received thanks 424 times, giving thanks to others 78 times. Referred 3 members to the community.
    Finally finished. We needed to strip down some of the machine to route the wiring, then it was time to upload all the information to GitHub.


    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4
    Reply With Quote Reply With Quote

  4. The Following User Says Thank You to routercnc For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 7 users browsing this thread. (0 members and 7 guests)

Similar Threads

  1. X Axis Stall
    By AndyW in forum Machine Discussion
    Replies: 10
    Last Post: 09-10-2021, 09:33 PM
  2. MACH3 hitting soft limits causes X axis to stall
    By STK2008 in forum Milling Machines, Builds & Conversions
    Replies: 2
    Last Post: 28-09-2020, 03:44 PM
  3. stepper motor stall?
    By mancave newby in forum Machine Discussion
    Replies: 12
    Last Post: 22-06-2018, 06:59 PM
  4. em806 Senssorless Stall Protection fault
    By charlieuk in forum Motor Drivers & Controllers
    Replies: 19
    Last Post: 15-11-2017, 11:36 PM
  5. Digital Drivers and Stall Detection
    By Washout in forum Motor Drivers & Controllers
    Replies: 6
    Last Post: 10-12-2013, 05:02 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules