. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 23-06-2025 #9
    mike-f's Avatar
    Lives in Kettering, United Kingdom.
    mike-f
    Last Activity: 16-06-2026 Has been a member for 1-2 years. Has a total post count of 21. Received thanks 28 times, giving thanks to others 2 times.
    OK will retry posting some of the images as they seem to not show in my previous post.

    Attachment 32643
    Above cross section of the spindle showing the Nilos ring (yellow) and spindle nose cover

    Click image for larger version.  Name: Z axis wiper .jpg  Views: 3323  Size: 102.9 KB  ID: 32645

    Above Z axis wiper, which was 3D printed in nylon.

    Click image for larger version.  Name: IMG_5903.jpg  Views: 3334  Size: 175.3 KB  ID: 32646

    Above Spindle cover fitted

    Click image for larger version.  Name: IMG_5905.jpg  Views: 3414  Size: 178.2 KB  ID: 32647

    Above: I also added some oil grooves to the Z axis as it only had a 3mm hole at one end on each side.


    Below are pictures of the Cabinet parts, clean up and painting.

    Click image for larger version.  Name: IMG_6519.jpg  Views: 3472  Size: 127.2 KB  ID: 32648

    Click image for larger version.  Name: IMG_6524.jpg  Views: 3648  Size: 226.6 KB  ID: 32649

    Click image for larger version.  Name: IMG_6549.jpg  Views: 3473  Size: 180.5 KB  ID: 32650

    Click image for larger version.  Name: IMG_6441.jpg  Views: 3413  Size: 163.6 KB  ID: 32654

    Click image for larger version.  Name: IMG_6553.jpg  Views: 3344  Size: 194.1 KB  ID: 32651
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: IMG_5770.jpg  Views: 811  Size: 152.8 KB  ID: 32644   Click image for larger version.  Name: IMG_6515.jpg  Views: 840  Size: 194.5 KB  ID: 32652   Click image for larger version.  Name: IMG_6588.jpg  Views: 891  Size: 209.4 KB  ID: 32653  
    Reply With Quote Reply With Quote

  2. The Following 2 Users Say Thank You to mike-f For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 11 users browsing this thread. (0 members and 11 guests)

Similar Threads

  1. Control box rebuild
    By Palletlad in forum Electronic Project Building
    Replies: 29
    Last Post: 02-07-2019, 10:36 AM
  2. REBUILD: Boxford Model B lathe rebuild
    By jonnydeen in forum Lathe Rebuild Logs
    Replies: 73
    Last Post: 16-07-2018, 08:48 AM
  3. REBUILD: Hardinge HC rebuild
    By northumbrian in forum Lathe Rebuild Logs
    Replies: 29
    Last Post: 21-02-2017, 12:07 PM
  4. Centec 2A rebuild
    By Web Goblin in forum Gantry/Router Machines & Building
    Replies: 3
    Last Post: 02-04-2013, 08:41 PM
  5. NEW MEMBER: New member wants to rebuild.
    By black5f in forum New Member Introductions
    Replies: 2
    Last Post: 21-06-2010, 11:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules