Thread: Wooden creations
-
2 Weeks Ago #1
Hello.
Seeing your works (you have made masterpieces) I wanted to upload some of my works from the past.
There are 2 bases for walnut wood tealights in the style of a chalice, one round and the other hexagonal, varnished.
I should point out that both the candlestick and the ring are made of a single piece of wood.
Because I like it a lot and also because of the difficulties I encountered, I have put it as an avatar on the forum.
I hope you like them.Last edited by NikosR; 1 Week Ago at 07:16 PM.
-
4 Days Ago #2
EDIT: Photo's added to post by Lee.
"I apologize, but I am unable to upload images due to technical difficulties with the forum. I hope this will be resolved shortly."Last edited by Lee Roberts; 16 Hours Ago at 02:25 PM.
-
17 Hours Ago #3
@NikosR
If you would like to email them to me, I can upload them for you and attach to your posts ?
[email protected] is my email address :)Lee
-
The Following User Says Thank You to Lee Roberts For This Useful Post:
-
16 Hours Ago #4
Hi Nikos,
I have attached your photos for your last post for you, your work looks great thanks for sharing. Attached is some MDF items i made last year, the BMW is 6ft long and now hangs in a car show room in Los Angeles. I used a French cleat design for the hanging mechanism.
P.S The Aston Martin wording is single 3mm MDF letters, I mastered the fit so they could be inserted into the green section once painted seamlessly...
Translation:
Έχω επισυνάψει τις φωτογραφίες σου για την τελευταία σου ανάρτηση, η δουλειά σου φαίνεται υπέροχη, ευχαριστώ που την μοιράστηκες. Επισυνάπτω μερικά αντικείμενα από MDF που έφτιαξα πέρυσι. Η BMW έχει μήκος 1,80 μέτρα και τώρα κρέμεται σε μια έκθεση αυτοκινήτων στο Λος Άντζελες. Χρησιμοποίησα ένα γαλλικό σχέδιο με τάπες για τον μηχανισμό ανάρτησης.
Υ.Γ. Η επιγραφή της Aston Martin είναι μεμονωμένα γράμματα από MDF 3 χιλιοστών, κατάφερα να τα εφαρμόσω τέλεια ώστε να μπορούν να εισαχθούν στο πράσινο τμήμα μόλις βαφτούν άψογα...Last edited by Lee Roberts; 15 Hours Ago at 02:41 PM.
Lee
-
The Following User Says Thank You to Lee Roberts For This Useful Post:
-
13 Hours Ago #5
LEE What end mill did you use to cut the 'Aston Martin' letters, and did you use the same one for the pocket on the green surface?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Wooden sunglasses
By jimkrum in forum Woodworking Project ShowcaseReplies: 5Last Post: 2 Weeks Ago, 04:56 PM -
Stan Kern's creations and work examples using the Logic Trace software
By Stan Kern in forum Logic TraceReplies: 14Last Post: 31-01-2020, 04:02 PM -
My first Wooden Toys
By davidcha in forum Woodworking Project ShowcaseReplies: 0Last Post: 21-02-2019, 02:38 AM -
Wooden CNC
By Andyshomecrafts in forum Gantry/Router Machines & BuildingReplies: 33Last Post: 10-08-2015, 11:54 PM -
wooden joints
By luke11cnc in forum Woodwork DiscussionReplies: 7Last Post: 18-10-2012, 11:59 PM

Reply With Quote

Bookmarks