ATC module for ER20 spindles

[Daz]

Hello everyone,

I have developed an Automated Tool Changer module for ER20 spindles. It works on the impact driver principle and delivers 35Nm or more of nut-tightening torque, meeting the ER20 spec. Happy to chat and answer any questions. Let me know what you think.

Here is a video of its operating principle:
https://www.youtube.com/shorts/eBymr9Z7TvU

And here, when I used it to mill an aluminium vacuum holding plate, doing some decent cuts with an 11mm, 2 flute end mill.
https://www.youtube.com/watch?v=FH3Ue6h8MHE&t=1s

[EddyCurrent]

Daz,

I've posted a link to this on the CamBam forum, it is very interesting. https://cambamcnc.com/forum/index.ph...80626#msg80626

[Daz]

Thanks, much appreciated! Let me know if you have any questions, happy to chat.