Jazz CNC JZR 9060 Router (Dean) with stand

[RobertE]

Selling my Jazz JZR 9060 built by Dean complete with a steel fabricated stand also made by him which he fitted with castors

It was bought in 2022 and has only had light hobbyist use for a couple of years. Doing some engraving and 3D profiling and for the rest of the time it has been in storage. I moved from London to Dorking and had to build myself a new workshop. It is powered by a decent Dell laptop.

The XY travel is 960x715 and the Z about 150. It is in perfect working order and cuts square and accurately.
You are welcome to trial or test it in Dorking, Surrey as it is all up and running.

Access is good and a truck can be backed up my double garage doors with no lift out of the workshop. Best would be x2 guys and a Luton with a power lift. Time for a cuppa and you're on your way within the hour.

I would like close to £3500 for it, that's a reduction of over £2000 over the new price. I will also include the Dell Laptop with UCCNC installed and Vectric Carve Pro 10.5. That cost me another £900. Also included a complete collection of new and pristine cutters which has cost probably close to £800. So you are getting the whole package at less than half what it would cost you to buy new.

I can further supply photos as needed and we can discuss details by phone. Message me if you have any questions.

Thanks for viewing,
RobertE

[lordchalfont]

Hi RobertE
Interested in the machine and would like to make an offer for it
Couple of issues from my side
I would like to see it in action before paying but given your description I don’t see any issues
I am currently on holiday and not available until Friday 31st July
Concious this maybe a long wait time so would be happy to pay a deposit to demonstrate serious intent (subject to final acceptance)
I am aware you have it on eBay offering a current reduction.
My offer would be £2500
Thanks
Ian Knox