bor bar milling holder 18mm

[atlas1302]

Hallo, I have a n 18 mm bore bar milling holder for my Ferm 350 lathe. Now i am confused about which cutter tool to use a right handed or a left handed tool.
Google says right handed, but when I look at thephoto on the sit , the tools are lefthanded.

Which one should I get, and pleas provide a reasoned explanation as to why.

Thank you kindly,

[Muzzer]

The boring head is threaded onto the arbor with a normal right hand thread, so it can only be used with a normal clockwise spindle direction (when viewed from above). That means the boring bar will need to be a RH tool, so that the insert sticks out and travels in the correct direction.

It's difficult to explain this clearly in words but here's an example of how it's used and what the bars look like. I've not visited this site before but it seems to illustrate typical practice:
https://johnfsworkshop.org/home/proc...e-boring-head/

Hope this helps.

[atlas1302]

Thanks. I believe a right-handed chisel goes from the inside out, so towards the opening.
So with a bore head, you have to go from the outside in, otherwise it won't work. In that case, I think you need a left-handed chisel.
That is just my logic, of course, but I also heard somewhere that a left-handed chisel is suitable for this.

I already have a right-handed one, so I bought a left-handed one to go with it. I never use left-handed chisels, because when turning you usually go from right to left. Turning out a hole is therefore done in mirror image.

If I am completely wrong, I would naturally like to hear about it; we learn something new every day.