Thread: Work scrap bin router build
Threaded View
-
14-01-2010 #19
Last Activity: 02-02-2020
Vic,
http://www.mechmate.com If you sign up to the forum (no charge) you have full access to all the drawings for a machine ... the Forums are a wealth of information but only about these machines ... There is a massive section on the pros and cons of V wheels and masses of info on grinding the angle iron ...
If I had the space for one of these, I would build it without hesitation. For a machine that can run all day machining 1" MDF with a huge router some of the stuff produced is stunning some very good fine detail 2.5D work etc.Tim G-C
“I disapprove of what you say, but I will defend to the death your right to say it.”
(attrib. Voltaire but written by Evelyn Beatrice Hall "The Friends of Voltaire" 1906)
-
The Following User Says Thank You to Wobblybootie For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: Melbourne Andy CNC build 1220x810 work area
By AndyGuid in forum DIY Router Build LogsReplies: 4Last Post: 20-04-2014, 08:25 PM -
Desktop size build to learn on - PCB routing / small MDF work.
By dynamis_dk in forum Gantry/Router Machines & BuildingReplies: 10Last Post: 26-02-2014, 11:50 PM -
Recycle electronics or scrap?
By gavztheouch in forum General ElectronicsReplies: 2Last Post: 05-02-2014, 04:16 PM -
eBay: Optical PCB drill - save it from scrap someone!
By bikepete in forum Items On eBay UKReplies: 1Last Post: 14-11-2013, 11:42 PM -
BUILD LOG: Scrap Heap Challenge
By TrickyCNC in forum DIY Router Build LogsReplies: 38Last Post: 16-09-2012, 07:52 AM
Bookmarks