. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 17-01-2010 #1
    Dan Brown's Avatar
    Lives in bristol, United Kingdom.
    Dan Brown
    Last Activity: 12-12-2011 Has been a member for 9-10 years. Has a total post count of 47.
    Hello, i need some help from someone who has set up system4 on mach3

    i've even got the info that comes with the board in front of me, but i must be doing something wrong as the enable light won't come on.

    if anyone can guide me through what ports and pins they used on the 'motor outputs' and 'output signals' on mach3 i'd be really really gratefull
    Reply With Quote Reply With Quote
  2. 18-01-2010 #2
    Dan Brown's Avatar
    Lives in bristol, United Kingdom.
    Dan Brown
    Last Activity: 12-12-2011 Has been a member for 9-10 years. Has a total post count of 47.
    i still can't work out what i'm doing wronClick image for larger version.  Name: mach3 outputsignals.JPG  Views: 2771  Size: 85.7 KB  ID: 1478g here, i'm going to post a couple of screenshots of my configuration and maybe one of you will spot something stupid that iClick image for larger version.  Name: mach3 motor outputs.JPG  Views: 4708  Size: 84.1 KB  ID: 1477'm missing, you can't see it in the screenshot but i've enabled the charge pump option and entered '1'in both port and pin

    Click image for larger version.  Name: sys4 instructions.JPG  Views: 1972  Size: 107.7 KB  ID: 1476
    Reply With Quote Reply With Quote
  3. 18-01-2010 #3
    Dan Brown's Avatar
    Lives in bristol, United Kingdom.
    Dan Brown
    Last Activity: 12-12-2011 Has been a member for 9-10 years. Has a total post count of 47.
    wow what the hell happened there?? those pics were supposed to be at the bottom
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Mach3 ports and pin setup to match my control box
    By Sparky in forum Artsoft Mach (3 & 4)
    Replies: 17
    Last Post: 13-11-2014, 04:00 PM
  2. New Motherboards and LTP1 ports. (You might have one)
    By Mattbatt in forum General Electronics
    Replies: 0
    Last Post: 05-04-2013, 10:12 AM
  3. system4 and mach3
    By cncroutman in forum Artsoft Mach (3 & 4)
    Replies: 0
    Last Post: 31-08-2010, 07:32 PM
  4. 2 motors on X with system4
    By Dan Brown in forum Motor Drivers & Controllers
    Replies: 4
    Last Post: 19-01-2010, 09:22 PM
  5. Ports and pins help ? mach 3
    By xchipx in forum Artsoft Mach (3 & 4)
    Replies: 0
    Last Post: 19-04-2009, 12:45 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules