Hello Hank
I have two lead screws taken from a cnc measuring machine that was being scraped, and are too small for my requirements. The thread diameter is 11.4mm and the pitch is approximately 12mm, the thread lengths are approximately 880mm and 610mm the nuts are some sort of nylon. The two open ends are machined to 6mm diameter with a 9mm sleeve pushed over them. These are available if you could make use of them.

Ivan.

Click image for larger version.  Name: 100_1176.jpg  Views: 2044  Size: 440.8 KB  ID: 1674Click image for larger version.  Name: 100_1178.jpg  Views: 1908  Size: 576.5 KB  ID: 1675Click image for larger version.  Name: 100_1177.jpg  Views: 1800  Size: 498.9 KB  ID: 1676Click image for larger version.  Name: 100_1175.jpg  Views: 2214  Size: 409.9 KB  ID: 1677Click image for larger version.  Name: 100_1174.jpg  Views: 1664  Size: 372.3 KB  ID: 1673