Warco mini mill cnc conversion

[irving2008]

There does seem to be a problem with the Warco Mini mill. I have just recently bought one and the X Y axis are not at 90 degrees. I too will have to get mine machined. The error I measured was 0.25mm over 100 mm on the Y axis. This is a pain to have to correct on a brand new machine. It came with a test certificate that stated it was measured at 0.025mm over 150mm. Clearly the machine was not measured.

John

Or not measured correctly... If its a new machine and clearly out of spec then I'd return it under Sale of Goods Act 1974 as 'not fit for purpose'. If it was bought 2nd hand then you don't have much option, but check first that there's no swarf etc trapped in the slides.