axeminster micromill stepper motors??

[irving2008]

That wasnt the one on eBay by any chance...? mumble mumble... was looking at that myself....

Those motors would probably do the job, although I've not run the calculations. They are 10mH inductance... above 300rpm they are struggling although it is highly driver dependent. I know because I have 4 of them... so we'll need to run the calcs and see... you will need to run them bipolar parallel at 36v or more to get useful work out of them.

[dickieto]

That wasnt the one on eBay by any chance...? mumble mumble... was looking at that myself....

Those motors would probably do the job, although I've not run the calculations. They are 10mH inductance... above 300rpm they are struggling although it is highly driver dependent. I know because I have 4 of them... so we'll need to run the calcs and see... you will need to run them bipolar parallel at 36v or more to get useful work out of them.

oops have i put my foot in it or what!!!!
sorry irving just took a stab at buying it,seemed all right for the money,hope to use it to make model digger parts etc.
theres another already cnc
http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT

[irving2008]

its ok, i chickened out at £100... but if i'd known ... what would you have gone to?

[dickieto]

its ok, i chickened out at £100... but if i'd known ... what would you have gone to?

my max bid was £240 only problem is i live near glasgow!!!
good job i'm going down near seller soon for business..