Hi from Crewe

[HS93]

Hi Boggy time you introduced the brains of the partneship, Bandit

Peter

[bogstandard]

Hi Peter,

I mentioned about him joining as well, but he mumbled something about becoming a physicist, and was too busy to take on anything else.

Maybe he will change his mind a little later.

John

[alan2525]

Hi! It's a small world - I recognise you from the Home Model Engine Machinist forum!

I've just purchased a CNC Taig Mill and currently coming to grips with it!

Good to see you here too!

Alan

[bogstandard]

Steve,
I forgot to answer you before, sorry.
Not really, the piston valve engine, I made two 'on the run', designing and making as I went along, and they took about two months. Mostly made from scrap picked up from here and there, and cost me about £10 each, and most of that was on the fastenings. The forum build for it was turned into a 'book', which should be able to be downloaded from here. A fair few have been sucessfully made.

http://rapidshare.com/files/23781034...ngine_book.exe

Hi Alan,

I have still to purchase my machinery. I want to try to get some facts and figures and software under my belt before I take the plunge. Mainly because it will be a secondary machine in my shop, and I won't be able to spend all my time on it when it eventually arrives.
If I can get the basics learned first, it won't be such a struggle for me when I get my grubby hands on it.

John

[jo200]

Hi from Sandbach
Joe here, been in electronics for 40 years, so decided to tax my brain with a little mechanical stuff...hats off to all you guys, I make 5 of everything, 4 scrap and one nearly right :)
I have just converted my old Tom senior miller to CNC, so we will be climbing the Gcode hill together.
cheers
joe