-
27-02-2010 #1
Hi,
I have a need for around 7 meters of open ended (i.e. off the roll) 10mm wide T5 Polyurethane belt. I have found a US source at a sensible price, see here http://shop.polybelt.com/10T5-Open-E...-B10T5-MPS.htm but unfortunately no shipping to the UK. Does anyone have a sensibly priced UK source they have used ?
Cheers, Cam.
-
28-02-2010 #2
hi cam
have looked for open ended timing belt in uk before , and could only find this, its not t5 http://www.motionco.co.uk/timing-bel...-25_38_49.html
-
28-02-2010 #3
cam
another option is here not open ended belt but couldnt you get a long belt and cut it http://www.bearingboys.co.uk/Timing_Belts-1039-c
-
28-02-2010 #4
-
28-02-2010 #5
Might be worth being a bit careful. This was on that web site.
Codan Rubber Limited – In Administration
Thursday 18th February 2010
The affairs, business and property of the company are being managed by the Joint Administrators who act as agent for the company without personal liability
G P Bushby and M Wild are licensed to act as insolvency practitioners in the UK by the Institute of Chartered Accountants in England and Wales (IP numbers 8736 and 9300 respectively)
-
28-02-2010 #6
Thanks for the links, unfortunately I can't cut a belt because I can't find one long enough. I need an axis travel of 1 meter, therefore I need a belt just over 2 meters. The http://www.roulunds.co.uk/ web site looks the best, but the price is still much higher than the US one. I think I may contact the US guys and see if they are prepared to ship to the UK. I will let you know how it goes.
Cam.
-
28-02-2010 #7
Mel
Just to clarify was it MOTIONCO that is winding up? as there it where i am getting my belt from for my build.
TNXIf the nagging gets really bad......Get a bigger shed:naughty:
-
28-02-2010 #8
I think it was http://www.roulunds.co.uk/ they have Codan plastered all over their web site.
-
28-02-2010 #9
Thats a relief
If the nagging gets really bad......Get a bigger shed:naughty:
-
01-03-2010 #10
Sorry. I should have made it clear. On the Roulunds web site it shows the history and they are Codan one and the same. I cut and pasted direct from http://www.roulunds.co.uk/ .
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Open Source Servos
By D.C. in forum Open Source Designs & PlansReplies: 0Last Post: 07-03-2013, 07:29 PM -
Open Rail, open source linear rail?
By Musht in forum Open Source Designs & PlansReplies: 0Last Post: 15-06-2012, 12:21 PM -
SHAPEOKO, the open source CNC
By baz550 in forum Open Source Designs & PlansReplies: 6Last Post: 31-05-2012, 08:59 PM -
Open Ended Timing Belts
By psiron in forum Gantry/Router Machines & BuildingReplies: 0Last Post: 11-06-2010, 10:55 PM -
Open source group project, anybody interested?
By Wotsit in forum Open Source Designs & PlansReplies: 28Last Post: 15-12-2009, 01:05 AM
Bookmarks