-
08-03-2010 #1
Well i have been planning, reading, posting, phoning and adding up all the bits in my cnc birth-plan. As with all plans I have tried to think of everything, but I just *know* that i have "unknowns".
I would love to hear from you guys, first timers and seasoned, what the most unplanned expenses were spent on. And if you could give a rough estimate (percentage) of how much you thought it was going to be VS actual spending.
-
08-03-2010 #2
Most worry about building the machine first before the furnishings (steppers, drivers, bearings). Wood, steel and aluminium is cheap in comparison to the trinkets.....Biggest cost i would say is leadscrews and bearings if you want to do it right. But you can always save on these things by lowering your expectations of what you want......Ying/Yang??????????
If the nagging gets really bad......Get a bigger shed:naughty:
-
The Following User Says Thank You to Swarfing For This Useful Post:
-
08-03-2010 #3
I would say that there wasnt one single great expense rather a lot of little unknowns plus lots of tools to do the so called simple things.
Then theres the exorbitant postage on metal for bearing housings plus all the bearings I got wrong mainly by not understanding what I was doing.
Still its a hobby after all and when compared to how much the car looses in value each year its cheap!
Peter
-
08-03-2010 #4
Well, if you place any financial value on your own tiime, I'd say I wasted the most money on leadscrews - being a cheapskate (who was inspired by the easy cnc mill seen on youtube), I went with threaded rod - then I upgraded to different pitch threaded rod before upgrading again - beforefinally getting some proper leadscrews off Ivan on here - man, what a difference. Threaded rod sucks (in the main it's got some warpage gojng down, the pitch is too small - just nasty stuff bering in mind it's the heart of your CNC). If I could offer one bit of advice to someone starting out on this journey - don't buy threaded rod!
Oh yeah...& anthing 'pucka' required for mounting your rod/rails will cost an unjustifiable arm & a leg - so if on a budget us SK type mounts (eg SK12, SK16, SK20 - whatever he diameter of your rods/bearing s are .... look 'em up on Ebay to get a flavour) - they're relatively cheap & will save you a lot of time/heartache on a budget.
-
The Following User Says Thank You to HankMcSpank For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
RFQ: Can someone make this for me? For money?
By richardmayo in forum Projects, Jobs & RequestsReplies: 1Last Post: 16-11-2013, 02:00 AM -
RFQ: Wood Sign/engraving required, small job one off money waiting...
By njhussey in forum Projects, Jobs & RequestsReplies: 8Last Post: 21-09-2013, 07:12 PM -
RFQ: Diy cnc'r looking to make parts for beer money, no job too small!
By matttargett4 in forum Projects, Jobs & RequestsReplies: 2Last Post: 03-01-2013, 10:50 PM -
Need some money making project ideas
By Fivetide in forum Marketplace DiscussionReplies: 10Last Post: 23-11-2012, 09:50 AM -
Easy money
By HankMcSpank in forum General DiscussionReplies: 2Last Post: 06-07-2009, 12:39 PM
Bookmarks