-
18-02-2008 #1
hi, ok ive made an rockcliff machine and have a slight problem the bed seem to be a little higher on the right hand side i was going to add another piece of mdf on top of the bed. But what i need piece g-code to level the bed, the bed is 340mm x 340mm ive tried but just cant get the gist of it ?
hope someone can help me with the basics :?:
i'm using Mach 3
thanks for looking steve
-
19-02-2008 #2
thanks very much kip i will give it ago this afternoon thanks again steve :)
-
29-05-2008 #3
Did it work?
.Me
-
07-06-2008 #4
Any chance you could reup this to the post i think the change of forums has lost it. Wouldnt mind it formyself to.
-
08-06-2008 #5
Thanks kip, i will move this to the FAQ section to.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Hello! Another new guy wishing to pick brains and ask for opinions...
By seashaw in forum New Member IntroductionsReplies: 4Last Post: 17-10-2013, 11:01 AM -
Can I pick your brains? How would you solve this puzzle....
By HankMcSpank in forum General DiscussionReplies: 45Last Post: 14-09-2011, 07:30 PM
Bookmarks