-
20-03-2010 #1
I'm after a quote for the 1 off motor mount plate as per the attached drawing.
Included within the zip file is a Solidworks model and a .dxf file.
Material either Aluminium or Steel (no specific grade required)
Will pay via Paypal
Post to Lancashire, UK
Required ASAP.
Any questions drop me a mail.
Regards,
AnthonyLast edited by antsals; 21-03-2010 at 11:56 PM. Reason: Updated the attachments
-
21-03-2010 #2
How deep are the countersinks (incidentally M8 cap heads require 13mm).
What is the tolerance?
Do you supply the metal?
Robin
-
21-03-2010 #3
They look like counterbores to me, not enough detail on the drawing.
.John S -
-
21-03-2010 #4
-
21-03-2010 #5
-
21-03-2010 #6
Not M8 counterbores. There to allow for some float on M6.
I'm after full supply material and machining and delivery.
Had missed I hadn't dimensioned the counterbores, I will update. There are counterbores on the back also.
-
21-03-2010 #7
Just updated the drawing with counterbore dimensions, also plate thinkness increased to 12mm
-
22-03-2010 #8
That's OK I'll still do it out of 10mm because you have plus or minus 2mm tolerance :naughty:
Not grinding your nuts off but yes the drawing is clear enough, I'll have a look tomorrow and see if I have any plate in, probably be 1/2" though if I have? any good ?John S -
-
22-03-2010 #9
-
22-03-2010 #10
1/2" would be great, Just a mini skim to ensure its flat. Think my 10mm + or - 2mm was trying to make it easy for people t find plate. Would prefer closer too 12mm. How much then?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
RFQ: Need part
By Buckis in forum Projects, Jobs & RequestsReplies: 0Last Post: 21-02-2014, 01:21 AM -
RFQ: Part required machining
By dazza in forum Projects, Jobs & RequestsReplies: 1Last Post: 21-10-2013, 02:46 PM -
RFQ: X & Z manufacture and design.
By D-man in forum Projects, Jobs & RequestsReplies: 0Last Post: 03-11-2012, 01:39 PM -
Sort of stuff I manufacture
By swarfy in forum Metalwork Project ShowcaseReplies: 0Last Post: 18-12-2010, 06:17 PM -
BUILD LOG: Mucky Mikes Marvelously Magnificent Machine Manufacture.
By Mucky Mike in forum DIY Router Build LogsReplies: 3Last Post: 19-04-2009, 02:20 AM
Bookmarks