Yet another cry for help :wave:

I've finally got around to looking at this again, welded up a frame, bolted it all down and leveled it up so its now rock solid, but I'm stuck on removing the spindle from the Atlas fixed headstock to rob the metal pulleys. The split caps on the Halifax were a doddle compared to this.

Ive looked at the 'atlas press' guide online and it makes it sound so easy... I just cant get enough clearance between the main pulley and the bearing housing to remove the woodruff key so the main shaft can slide out.

And I'm completely lost with disassembling the backgear from the eccentric cam...Anyway I'm sure there is some clever person on here that knows :whistling: