Okay,

Very serious question here, does anyone know if the DIYCNC Spindle 2 board can be wired into a Kress 1050 FME Spindle and if so how? Looking at having to drop RPM as the current speed of 5K is just to high when looking at a max feed rate of 1.2m/min and realistic for some bits of .9m/min feed rates for the precision in cut that I am looking for.

So anyone who has an answer to this and possible diagrams for the surgery in side of a Kress 1050 please speak up.

Thanks and have a good day folks.

Michael