Thread: supports for ballscrews
Threaded View
-
27-04-2010 #2
Last Activity: 17-03-2017
Mike,
On a very short screw turning slowly enough then it can usually be omitted. The main purpose of the floating bearing is to control screw whip, which you wont get at 300mm unless you are using a very thin screw (<8mm) and spinning it >4000rpm!
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Centec 2 ballscrews
By jonnydeen in forum Lead Screws, Nuts & SupportsReplies: 29Last Post: 11-07-2023, 09:53 AM -
machined ballscrews
By wilfy in forum Lead Screws, Nuts & SupportsReplies: 15Last Post: 30-07-2012, 05:42 PM -
RFQ: Machining mounts in 80x40 profile for FK ballscrew supports
By Shinobiwan in forum Projects, Jobs & RequestsReplies: 1Last Post: 20-03-2012, 12:49 AM -
Two ballscrews on both X and Y axis?
By Jonathan in forum Gantry/Router Machines & BuildingReplies: 2Last Post: 02-02-2012, 01:55 AM -
FOR SALE: Linear Rail, Carriages & Supports for sale
By AdCNC in forum Items For SaleReplies: 1Last Post: 08-01-2010, 12:27 AM
Bookmarks