Threaded View
-
18-05-2010 #4
We sell the PM752 with the SY60 and they work well together.
Also 72V is a bit too high for the PM752 driver, it will work, but is a bit close to the max voltage.
At a high voltage the Arc motor should perform well, but will not spin as fast as the Sy60, but will have a lot more torque at the slower speeds.
I would also point out that the datasheet is wrong, and if connected in parallel the current would be 6A not 4.2.
It is odd that they say the motor is rated as 4.2A in parallel because parallel current would be double the series current.
All i can think of is that the motor has a problem running at 6A, so if you decide to use this motor, i would ask the question to them.Visit Us: www.automationshop.co.uk
-
The Following User Says Thank You to Gary For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Matching Drivers with Steppers
By hoppo in forum Motor Drivers & ControllersReplies: 4Last Post: 21-11-2012, 01:19 PM -
Any one used drivers and steppers from CNC4you
By sebring115 in forum Motor Drivers & ControllersReplies: 14Last Post: 30-11-2011, 11:32 PM -
Help wiring M60STH88-3008DF Steppers Motors to 752 Drivers
By Mad Professor in forum Stepper & Servo MotorsReplies: 12Last Post: 01-09-2011, 10:09 AM -
Has anyone used these steppers or drivers?
By Jonathan in forum Stepper & Servo MotorsReplies: 2Last Post: 24-03-2011, 02:24 PM -
Steppers and drivers
By Davidh in forum Motor Drivers & ControllersReplies: 3Last Post: 12-06-2009, 05:59 PM
Bookmarks