Thread: Voodoo jogging problem..
Threaded View
-
25-05-2010 #1
Hi..
This is a weird one, although it would be nice if someone said 'that's a common problem, here is the fix'..!
When I jog my machine X+, it moves at about 1800 (Mach 3), but when I jog X-, it goes at 4000.. Now, if I jog at X- (4000), then jog the Y axis, the Y axis moves at full speed...
BUT..! If I jog X+ (1800), then try to jog the Y axis, it moves at half speed...
Really cant work out what is going on but this problem has made for some interesting parts cut on my cnc router, weird arcs, wrong size sections etc.. I have a feeling this might be electronic rather than mach, just dont understand why it would do this..
Any ideas guys?
thanks
Steve..
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Powertran VFD problem
By phill05 in forum Spindles & Drive MotorsReplies: 7Last Post: 29-10-2013, 07:59 PM -
Another screw problem
By Swarfing in forum Marketplace DiscussionReplies: 5Last Post: 27-03-2013, 09:24 PM -
Problem with X
By gorbo in forum General DiscussionReplies: 17Last Post: 24-02-2011, 05:33 AM -
z axis problem on rye ma 1500 with a bosch cc100
By rickybabe in forum Rye CNC RoutersReplies: 3Last Post: 28-04-2010, 09:04 AM -
Z Problem
By airwolf in forum Machine DiscussionReplies: 2Last Post: 10-11-2009, 08:08 AM
Bookmarks