-
01-06-2010 #11
-
01-06-2010 #12
Ok
Debounce I did yesterday didn't make any difference, the 5v is from a regulated power supply and is a steady 5.3v
-
01-06-2010 #13
Just the 5 volt John
-
01-06-2010 #14
Hmmm... assume thats what it was on before you swapped PCs...
-
01-06-2010 #15
Yep
I have purchased a video card for my old pc in the hope that will get it up and running again, should be here Thurs.
But I need to sort this out as I know the old PC won't last for ever, a friend has a smooth stepper and has offered to bring it over and try that but I would like to think the PC is more than upto the job without the smooth stepper.
Andy
-
01-06-2010 #16
can you retry your G-code test with some x & Y thrown in as well?
-
01-06-2010 #17
-
01-06-2010 #18
What version of Mach ? because this is two reports of jittering i have seen.
can you go back to a known older version ?
Older versions are here.
ftp://machsupport.com/John S -
-
01-06-2010 #19
Yes can do John again will have to be tomorrow off to bed now up at 5.30 for work
Thanks for the help
Andy
-
03-06-2010 #20
Bit of a Red Herring!
I have managed to get my old PC back up and running by fitting a new graphics card, so I thought my troubles were over for the time being, but it was not to be I have the same fault with the old computer that I had with the new one!
So this weekend will be taken up fault finding hopefully with the aid of a scope.
I have checked the grounding Irving and that seems to be ok so at this moment in time I am still a bit lost how I can go from a fully working machine to this overnight?
It all adds to the fun...............not
I will keep you posted with my findings.
Andy
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Roundover finishing - what's causing this..?
By Wal in forum Woodwork DiscussionReplies: 4Last Post: 18-03-2014, 03:37 PM -
My computer desk
By wilfy in forum Woodworking Project ShowcaseReplies: 27Last Post: 25-12-2012, 09:35 PM -
computer crash help!!
By dinasblu in forum General DiscussionReplies: 2Last Post: 11-07-2011, 12:37 PM -
FOR SALE: Computer and other Bits
By Jimmybristol in forum Items For SaleReplies: 0Last Post: 30-05-2011, 02:13 PM -
Add a computer to your network
By Lee Roberts in forum Computer SoftwareReplies: 0Last Post: 19-11-2008, 01:15 AM
Bookmarks