ZAPP SY60 wiring help

[irving2008]

Almost certainly the wiring has changed if you can't turn it when powered off... the correct wiring according to the latest data sheet is Red to Blue/White, blue to red/white, etc.. which seems to be a convention of sorts (for Unipolar the common is the solid colours) - at least many other steppers follow this arrangement (and many of course don't!)

[Smiler]

Yes, traced the phases and you are correct. Only problem now is the motor while nice and smooth is very slow, even after tuning in Mach, hope it's not damaged.

If these are the motors Gary is supplying with Driver Kit 1 then the wiring diagram needs changing ASAP, might be hard to believe but there are people out there even more electrically inept than I and it will totally stump them :)

Cheers Irving, knew I could rely on you.

Jeff.

[jonm]

smiler
this is the data sheet for the steppers you have same as the ones i have http://www.axiscnc.com/pdfdocs/M60STH88-3008DF.pdf