Hi from Leicester

[Normsthename]

Hi
I am new to the site, I was pointed to it by another member (Chip)
My name is Andy and I am located in Leicester.
I have a homebuilt Plasma machine that I built about two years ago.
I did everything myself, designed it, built it and wired it
It started out as a CNC Router but I later converted it over to Plasma
It runs a Hypertherm Powermax 1000 and a Campbell THC 300 Torch Height Controller.
Here is a video of my machine for those interested



This is a picture of the Box electronics



I hope to build a Mark 2 machine this Winter if funds are available :whistling:
It will have a larger bed size (2000 x 1000), lighter gantry and will also run a lot faster

Andy