Thread: Linear rail and bearing
Hybrid View
-
30-06-2010 #1
Hi
Before it goes on ebay is anyone interested......
I have a 1m (39.37 inches in old money) length of C25 (origionally from Eurobearings) rail and one linear recirculating bearing for sale. The bearing has hole centres (dia 7mm) 45 x 57mm, the "bed" of the bearing is 58x70. Very stiff, light use, no play (preloaded), very small amount of surface corrosion but none on bearing face. Smooth and very strong. Used to hold z axis (big servo, screw, Kress) no problems. Bearing has wipers and grease nipple.
for rail dims see:
http://www.euro-bearings.com/mgsrail.htm
All bolted with 17 bolts to a bit of Aluminium bar 3 inch by 3/4 by 1m which is tapped 2x M8 at each end for mounting? I can take this off if not wanted. Sensible offers? I suggest buyer collects as it's heavy. 9kg with Aluminium, about 4-5 without.
TomSherline lathe, Chester DB11V lathe, Myford/ Rodney mill, CNC mill Isel/ home made, Sealy Hack Saw, Meddings Pillar drill.
-
30-06-2010 #2
-
02-07-2010 #3
Consider it sold, many thanks.
TomSherline lathe, Chester DB11V lathe, Myford/ Rodney mill, CNC mill Isel/ home made, Sealy Hack Saw, Meddings Pillar drill.
-
02-07-2010 #4
Can anyone suggest what its worth?
TomSherline lathe, Chester DB11V lathe, Myford/ Rodney mill, CNC mill Isel/ home made, Sealy Hack Saw, Meddings Pillar drill.
-
02-07-2010 #5
Its Abba Rail by the look of it.
If it is its the rail would be BR25R-L1000-N and the bearing would be the BRH25A.
We sell the bearings for £42 and the rail would be £80.00
This is new and there is also VAt to include.
Second hand would be about 25% of this, but you really need two bearings per rail and would normally have two rails.Visit Us: www.automationshop.co.uk
-
02-07-2010 #6
Hi Gary
Thanks. It was origionally source from Eurobearings, only ever had one carriage. That gives me a really good value though. Many thanks.
TomSherline lathe, Chester DB11V lathe, Myford/ Rodney mill, CNC mill Isel/ home made, Sealy Hack Saw, Meddings Pillar drill.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
What is the best way to mark out for bearing blocks and linear rails?
By gavztheouch in forum Gantry/Router Machines & BuildingReplies: 10Last Post: 18-05-2014, 02:08 PM -
Open Rail, open source linear rail?
By Musht in forum Open Source Designs & PlansReplies: 0Last Post: 15-06-2012, 12:21 PM -
FOR SALE: New Hiwin HGH15 bearing blocks / carriages profile rail
By Jonathan in forum Items For SaleReplies: 0Last Post: 06-11-2011, 05:26 PM -
FOR SALE: 25mm round rail bearing blocks
By D-man in forum Items For SaleReplies: 1Last Post: 31-10-2011, 09:26 AM -
THK linear bearing rails
By Tonyel in forum Rails, Guideways & BearingsReplies: 0Last Post: 01-11-2008, 03:21 PM
Bookmarks