Thread: Need helpwiring up from scratch
Threaded View
-
11-07-2010 #1
Got hooked on CNC when I first seen one in action on You tube,must have spent the best part of an hour or more watching these machines in action...Fantastic!
So I've bought me parts,constructing a bed which is still in the making.
Thought I'd try a dry run of getting the motors in operation and found its not as simple as I thought in getting them up and running so ifanyone could helpme out wiring themup from scratch I'd be ever so grateful :confused:
I think my problems stems around the breakout board which I purchased from DIYcnc
This is the PDF link to the info on it....
http://www.diycnc.co.uk/System1.pdf
The Drivers and Motors I purchased from ArcEuro Trade at an incredible lowprice.
This is the PDF link to the motors...
http://www.arceurotrade.co.uk/projec...-010-00400.pdf
And the PDF linkto the drivers....
http://www.arceurotrade.co.uk/projec...r%20Manual.pdf
If someone could kindly take the time and jot down where the wiring up should go I'd be eternally grateful,although I've managed to wire the components up right? Ijust cannot fo the life of me fathom out why I can't get the motors to sing in Mach3 and its really annoying me :confused:
George
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: 1250 x 1250 cnc router (from scratch)
By Danielroyal25 in forum DIY Router Build LogsReplies: 56Last Post: 08-08-2014, 07:35 PM -
BUILD LOG: starting from scratch- router 1st project
By idefix in forum DIY Router Build LogsReplies: 24Last Post: 10-01-2014, 12:53 AM -
NEW MEMBER: Have Built 2 CNC machines 1 mill/drill conversion and 1 Router/plasma from scratch
By AGB in forum New Member IntroductionsReplies: 3Last Post: 06-02-2013, 03:16 AM -
Starting from scratch, what would you use as a base for a CNC metal lathe?
By m_c in forum Lathes, Lathe Rebuilding & ConversionsReplies: 4Last Post: 23-01-2011, 05:37 PM -
Building from Scratch or follow some plans?
By Monk in forum Gantry/Router Machines & BuildingReplies: 22Last Post: 12-08-2010, 10:27 PM
Bookmarks