. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 12-07-2010 #29
    irving2008's Avatar
    Lives in NW London, gateway to A1 & M1, United Kingdom.
    irving2008
    Last Activity: 17-03-2017 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,849. Received thanks 179 times, giving thanks to others 5 times. Referred 6 members to the community.
    you cant tune the motors properly til the mechanics are built, but you can set expected values. The values I gave are very conservative ones that should allow the motors to work easily.

    When you are on the motor tuning page in MACH3 I believe that the up and down arrow keys cause the motor to rotate, which is a lot easier than running g-code each time to exercise that axis.
    Last edited by irving2008; 12-07-2010 at 11:57 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. BUILD LOG: 1250 x 1250 cnc router (from scratch)
    By Danielroyal25 in forum DIY Router Build Logs
    Replies: 56
    Last Post: 08-08-2014, 07:35 PM
  2. BUILD LOG: starting from scratch- router 1st project
    By idefix in forum DIY Router Build Logs
    Replies: 24
    Last Post: 10-01-2014, 12:53 AM
  3. NEW MEMBER: Have Built 2 CNC machines 1 mill/drill conversion and 1 Router/plasma from scratch
    By AGB in forum New Member Introductions
    Replies: 3
    Last Post: 06-02-2013, 03:16 AM
  4. Starting from scratch, what would you use as a base for a CNC metal lathe?
    By m_c in forum Lathes, Lathe Rebuilding & Conversions
    Replies: 4
    Last Post: 23-01-2011, 05:37 PM
  5. Building from Scratch or follow some plans?
    By Monk in forum Gantry/Router Machines & Building
    Replies: 22
    Last Post: 12-08-2010, 10:27 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules