Wood cnc router for hobbyist

[Normsthename]

as said before I only want to do text and the odd bit of decorative stuff, nothing too elaborate.

That's what everyone says when they first start out
Once you get a machine up and running you soon get other ideas on what you could make on the machine and then wish you had made a bigger machine!

Andy

[Stads]

Have a largish (too large for me really) gantry based machine in my shed (Mostly MDF not made by me) old Camtronics interface but no PC.
Looking for something a lot smaller such as the desktop machines.
Location is East Devon and would need to be collected, will help load.
Kev S

[routercnc]

Have a largish (too large for me really) gantry based machine in my shed (Mostly MDF not made by me) old Camtronics interface but no PC.
Looking for something a lot smaller such as the desktop machines.
Location is East Devon and would need to be collected, will help load.
Kev S

Hi Kev,

Best to put a new thread in the "for sale" section. Go to the blue banner at the top of the page and add it under Marketplace > Items for sale