Workshop Clearout (lathes, mill bandsaw etc)

[irving2008]

you must be gutted...:sad:

How much do you want for the MIG & helmet (ignoring the minor issue of getting it here for now)

[djh82uk]

Yeh im not looking forward to it one bit

It's a clarke gasless mig, id say £45 with the auto helmet, also comes with some magnet clamps and a box of mig wire, auto helmet never been used other than to go ooh & ahh for 5 mins while looking up at bright lights. The reason ive not offered shipping on the smaller items is that im working a lot latley and doing 12 hour days, i can never say for sure what days I am home and the added pressure of finding a post office, wrapping stuff up etc I could do without, eventhough I could put some on ebay then.

[djh82uk]

Ha i don't think the wife will go for the caravan idea :P

To be honest im not that experienced with welding eqpt, I wanted a Tig & a proper mig welder but could not afford them. I got on a lot better with the gasless mig than I did with the arc welder, started getting nice clean welds after a few days practicing but would not trust myself with anything load bearing or critical with it. Have never welded with gas tho.

DJH

[Gary]

Interested in the compressor, can you tell me the spec of the compressor.

[GeorgeD]

Can buy the Seig C3 here for £390 new,sorry didn't see this until your post came up.

http://www.arceurotrade.co.uk/Catalo...-C3-Mini-Lathe

[djh82uk]

Can buy the Seig C3 here for £390 new,sorry didn't see this until your post came up.

http://www.arceurotrade.co.uk/Catalo...-C3-Mini-Lathe

Hi, it's £460 on arc euro with the DRO's fitted the same as mine, add onto that the QCTP, wood lathe kit, thread dial indicator, carriage stop, drill chucks, Tailstock die holder, carbide, HSS & indexable tooling then it seriously starts to add up.

not to mention all the other little things

Thanks

DJH

[djh82uk]

Hi Gary

Here are the specs I found by searching on the model:

2.5HP, 270 lit/min, 24 litre capacity, dual air outlet

Thanks

DJH

[GeorgeD]

Hi

Are you checking your PM inbox?

Sent you three PM's and you still have not replied.

[djh82uk]

Hi

I am on 24hr call and had very little break from it so I do apolagise.

I will go through my PM's now

Thanks

DJH