Quote Originally Posted by Normsthename View Post
I was thinking about using 20mm rail so that sounds like it will be the size!
Andy, your choice of course, but IMHO 20mm would be an expnsive overkill unless you have something else in mind, like mounting a spindle, in which case you need to be thinking larger

Quote Originally Posted by Gary View Post
We also sell hiwin rails, but if you want something a bit lower cost we also have some ABBA rails that are the same as the HGR15 and HGW15 bearings.
These are slightly lower cost than hiwin.
HG15 works out about £221 + VAT for what Andy needs, so cheaper than MD, but couldnt see the ABBA stuff on the site Gary...