Hiwin Profiled Rail Question

[Gary]

I have removed the abba stuff from the site, but will be adding it to he surplus section later this weekend.
Will be about 10% lower.

[Normsthename]

Thanks for the replys

Andy, your choice of course, but IMHO 20mm would be an expnsive overkill unless you have something else in mind, like mounting a spindle, in which case you need to be thinking larger

So you think I should use 15mm, like I said it only has to support the Z axis and plasma torch.
There is no contact with the torch and sheet, except when it lowers to reference the height for the THC
I am going to post a Build Log soon showing my proposed modifications to my plasma machine

Andy