Quote Originally Posted by Ricardoco View Post
Whilst reading the Lenze 534 manual ive come across another requirement....

If a reverse motor direction is required a simple polarity change is required using one of the contactors, however the motor motion must stop before the reverse direction is activated, I will need to incorperate a timer to allow for the motor to come to a standstill before the reverse is activated, I can tune the time once I know how long that takes, I could also introduce electrodynamic braking to reduce the changeover time, I will have to investigate all that before I complete a reverse control but that will be a secondary to getting it moving in a forward direction first...

Rick
Other than CNC controlled tapping, why would you want to change spindle direction? My mill's cutter always rotates in the same direction, there is no reversing facility as standard, probably becuase every cutter I have ever seen (and I know thats not many) cuts in the sme direction. Granted I will be able to reverse the motor from the (yet to be fitted) VFD, but I feel there is an inherent risk in being able to reverse the spindle direction without some interlock.