Thread: The illusive Boxford 260vmc
Threaded View
-
09-08-2010 #11
Ok Im now waiting for the postman again, Ive spent the rent and purchased a few bits Ahhhhemmm well although they are not all for this project they are all things I wanted to buy and I suppose they are related and could be used for this project if required..
The List...
3 x 460mm X 300mm Three layer (black-white-black) Sheet
Pokeys55t Keyboard Emulator/Simulator.
20x4 LCD display module HD44780 Blue LED Backlight *UK
CONNECTOR, 20 Way IDC Socket...Lot of 5
CONNECTOR, 34 Way IDC Socket...Lot of 5
34 Way IDC Right Angle latched Box Header PCB x10
20Way IDC Straight latched Box Header Connector PCB x10
100 x 330 Ohm 0.25w Carbon Resistors 1/4w Resistor 330R
100 x 4k7 Ohm 0.25w Carbon Resistors 1/4w Resistor 4k7R
Brand New 555 Astable Timer Project Kit IN UK
RKP18Relay8 8 x Kam Ling SPDT Relay PCB for PIC® MCU
RK L298 H-Bridge PCB for DC Motor Control with L298 IC
RKPT40 Project Kit for PIC® Micrcontrollers Self Build
RKP40C Compact Project Self Build Kit for PIC MCUs
top853 USB universal programmer EPROM MCU GAL PIC
10nF 0.01uF Ceramic Capacitors Pack of 50____cc10n
10 x 2N3904 NPN Transistor
Step Cone Drill Bit Hole Cutter 4-12mm 4-20mm & 4-32mm
6 x FINDER 2 Pole CO 10A Din Mount Mini Power Relay 24VAC
5 x Microchip PIC16F877A 16F877 + Free HOLDER
5 x Vero style stripboard strip board 72 x 47mm 371Hole
Slotted Opto Switch H22A1 Qty. 2 NOS
74HC390 Integrated Circuit x 5 pieces
DIGITAL RED LED PANEL FREQUENCY SPEED METER TACHOMETER
Phew
I so hate waiting
Grrrrrr
Just my luck all the bits not specifically for this project will turn up first...
Update as and when the stuff arrives
RickAlways bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
The Boxford 260VMC as you probably never seen it before!
By rnr107 in forum Boxford Vertical MillsReplies: 36Last Post: 28-04-2021, 07:57 AM -
Boxford 260 VMC
By shoeswith in forum Boxford Vertical MillsReplies: 3Last Post: 10-04-2017, 06:20 PM -
boxford vmc 300
By bigred5765 in forum Boxford Vertical MillsReplies: 0Last Post: 22-04-2014, 04:22 PM -
Boxford mt2
By Hellfire in forum Boxford LathesReplies: 6Last Post: 03-08-2012, 08:46 AM -
Boxford 160 TCL
By Brinner in forum Boxford LathesReplies: 1Last Post: 31-03-2012, 09:11 PM
Bookmarks