. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 02-08-2010 #1
    John S's Avatar
    Lives in Nottingham, England, United Kingdom.
    John S
    Last Activity: 23-09-2017 Has been a member for 9-10 years. Has a total post count of 2,073. Received thanks 140 times, giving thanks to others 45 times. Referred 1 members to the community.
    Adie,
    Why 3.5 hours ? How big is the disk ?
    John S -
    Reply With Quote Reply With Quote
  2. 02-08-2010 #2
    AdCNC's Avatar
    Lives in Stoke-onTrent, United Kingdom.
    AdCNC
    Last Activity: 08-02-2020 Has been a member for 9-10 years. Has a total post count of 298. Received thanks 13 times, giving thanks to others 3 times.
    Hi Johnyboy the disk is 90mm, what i did was to do 2 passes of 0.1mm stepdown and a step over of 0.1 as the tip of the cutter was 0.2mm, i wanted to see how detail i could get out of the machine.

    by the way the small txt (names) are 2mm high
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Should i use a engraving cutter for this job?
    By mark84 in forum Tool & Tooling Technology
    Replies: 0
    Last Post: 30-01-2014, 07:58 PM
  2. Engraving brass
    By Philly in forum Machine Discussion
    Replies: 3
    Last Post: 03-08-2013, 10:09 PM
  3. Aluminium Engraving
    By Mad Professor in forum Metal Finishing Techniques
    Replies: 2
    Last Post: 04-05-2013, 11:02 PM
  4. diy Engraving head
    By riche543 in forum Metalwork Project Showcase
    Replies: 2
    Last Post: 25-06-2012, 01:31 PM
  5. NEW MEMBER: engraving
    By pontinal in forum New Member Introductions
    Replies: 3
    Last Post: 11-05-2012, 01:02 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules