Thread: Just done abit of engraving!
Threaded View
-
02-08-2010 #1
Well, ive tried my hand at engraving some brass stock i had in the garage and i was supprised at the results!
What you guys think?
I used a 20* vbit machine time was 3.5hrs
and about 15mins polishing
2 mins to cut the wooden surround
Alls i need to do now is lacquer the brass and the Oak.
Thats after i fit the card holder.
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Should i use a engraving cutter for this job?
By mark84 in forum Tool & Tooling TechnologyReplies: 0Last Post: 30-01-2014, 07:58 PM -
Engraving brass
By Philly in forum Machine DiscussionReplies: 3Last Post: 03-08-2013, 10:09 PM -
Aluminium Engraving
By Mad Professor in forum Metal Finishing TechniquesReplies: 2Last Post: 04-05-2013, 11:02 PM -
diy Engraving head
By riche543 in forum Metalwork Project ShowcaseReplies: 2Last Post: 25-06-2012, 01:31 PM -
NEW MEMBER: engraving
By pontinal in forum New Member IntroductionsReplies: 3Last Post: 11-05-2012, 01:02 PM
Bookmarks