Fingers crossed it'll cut ally

**Swarfing** · 31-10-2010

Mark if you don't have a pillar drill and vice, drill a hole the size you want a spare piece metal and clamp that over your intended spot then use that as your guide

**blackburn mark** · 01-11-2010

Originally Posted by 2e0poz

Mark if you don't have a pillar drill and vice, drill a hole the size you want a spare piece metal and clamp that over your intended spot then use that as your guide

im thinking it was my marking out skills that let me down, i was drilling through 40mm in one go and my holes were bang on square