Fingers crossed it'll cut ally

[Jonathan]

no, im on a chineese 5 axis TB6560...
its amazing how much more the gantry sides flex in the Y axis compared with the X axis
ill stick some sort of buttress on them if its a problem

I'm not thinking today am I, you mentioned the driver only a couple of posts ago, sorry!

Plate is the worst possible cross section for bending in the Y direction. Maybe you could securely bolt some bigish aluminium angle to the plate to make it a bit stronger...ideally get it welded on.
All that aluminium profile must have cost a lot.

I intend to look at the servo controller on Wednesday, or this weekend at the latest.