Fingers crossed it'll cut ally

**Tenson** · 01-10-2012

Oh I also forgot to say, the surface of anodized aluminium is non-conductive, but the surface is easily scratched through to the conductive bulk. It is most definitely worth earthing the chassis so if any high voltage comes in contact with it, the power can sink to ground instead of the person who might be touching it. Wherever you connect the earth tag make sure it is well connected to the bulk of the material since the surface layer does not conduct.

**blackburn mark** · 04-10-2012

Originally Posted by Tenson

Oh I also forgot to say, the surface of anodized aluminium is non-conductive, but the surface is easily scratched through to the conductive bulk. It is most definitely worth earthing the chassis so if any high voltage comes in contact with it, the power can sink to ground instead of the person who might be touching it. Wherever you connect the earth tag make sure it is well connected to the bulk of the material since the surface layer does not conduct.

yea.. i sussed that one out in the end.. its kind of suprising that anodized aluminium is none conductive