Not Just another Boxford tcl 125 thread....

[cooliced]

Ok so today, i looked at the wiring of the parallel cable to make sure it was fine and yes every seems ok.

Checked wiring to make sure nothing was shorting out, again everything looks fine.

at a loss now lol :(

[Ricardoco]

Ok so today, i looked at the wiring of the parallel cable to make sure it was fine and yes every seems ok.

Checked wiring to make sure nothing was shorting out, again everything looks fine.

at a loss now lol :(

This morning i was installing my new breakout board into my boxford and all sorts of od things were happening, turned out ide not connected the GND pin on the board with the driver GND, so its easy to miss stuff....