-
19-03-2015 #521
-
19-03-2015 #522
Missed that first time round, nice idea looks cool.
Not sure on Clive and the chocblock, I guess he's right but what to do...
I guess you need somthing of a busbar, mini consumer unit? Or is that ott?
.Me.Me
-
19-03-2015 #523
Neil what do you thin: http://www.directindustry.com/prod/s...5-1058789.html
Or somthing like this: http://www.12voltplanet.co.uk/power-...s-busbars.htmlLast edited by Lee Roberts; 19-03-2015 at 05:54 PM.
.Me
-
19-03-2015 #524
Maybe mount the MCB's on the din rail with a busbar and then a seperate din mounted busbar for the -ve?
-
19-03-2015 #525
:) sounds like a plan :), just seen these: http://m.ebay.co.uk/itm/321061386290
.Me
-
19-03-2015 #526
I remember now...EddyCurrent linked to that in his build...looks like a good solution, ta!
-
19-03-2015 #527
-
19-03-2015 #528
These seem ok and you would get the fuses for the drives (if you want them) you would need two of them fuse in the +ve and bridge the -ve solid (no fuse) cheapo choc blocks will melt if the screws come loose. Clive
ps the others with the led in would be no good as you will be running 70V ish.Last edited by Clive S; 19-03-2015 at 07:08 PM.
-
19-03-2015 #529
-
20-03-2015 #530
How about soldering the 1 wire from the caps directly to 3 smaller wires and connecting them to din terminals.
Then connecting from there to MCB's before going to the drivers?
Thread Information
Users Browsing this Thread
There are currently 127 users browsing this thread. (0 members and 127 guests)
Similar Threads
-
Does anyone want to build me a cnc router?
By totally useless in forum Open Source Designs & PlansReplies: 25Last Post: 05-05-2014, 12:44 AM -
My new, and first build....comments greatfully received
By berk in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 12-01-2014, 03:15 PM -
BUILD LOG: CNC Router New Build
By PilotTom in forum DIY Router Build LogsReplies: 12Last Post: 25-05-2013, 03:49 PM -
BUILD LOG: A3 Router Build
By GTJim in forum DIY Router Build LogsReplies: 6Last Post: 17-02-2012, 12:53 PM -
CNC construction TUNISIA give your comments
By ali hedi in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 06-07-2011, 11:58 PM
Bookmarks